Hikvision DS-HD1, RCA (hsdb2a), EzViz (db1), LaView, Nelly's and LTS video doorbell Mount for Vinyl, Hardi board, Aluminum, Cedar
Fits RCA (HSDB2A) and Hikvision DS-HD1 on Standard style siding.*
should also fit the following doorbells on standard style siding as well: (not tested) EZVIZ (DB1) LAVIEW (LV-PDB1630-U) Nelly's (NSC-DB2) LTS (LTH-7132-WIFI)
Does NOT fit Ring doorbells. For Ring doorbells see separate listing.
Item Description: Colored shim to fix the angled doorbell problem where your doorbell when screwed to angled siding this will make the doorbell face straight ahead instead of slanted upwards. Choose your siding then Choose a color that’s close to your siding color, black or silver to match the back of Doorbell, or match the cover.
*Does NOT fit on Dutchlap style siding (Dutch lap siding has a flat front that proceeds into an angled top that slants backwards towards the house. ) For Dutchlap vinyl siding please contact me for custom order as every Dutch lap siding panel is different and these have to be made to fit your siding dimensions. Fits standard siding with common 1/2 projection.
To Order: Choose Your siding from the "Siding Type" dropdown first. If your siding size is not listed in the dropdown please contact me. Choose your color from the "Color" dropdown last.
Measuring your Siding: To measure your siding you measure a single panel from the bottom lip of the top panel to the bottom lip of the next panel. On the panel you want your doorbell. It’s important to not only measure the height of panel but also the projection(how much one panel overlaps the other) when ordering to confirm fitment. For best fitment for standard vinyl Siding your measurement should be 1/2 inch. For board metal mounts it should be 3/8 projection. If when you are measuring your siding to choose a size and you notice there is a "hump" in your tape measure and it does not lay flat on the siding. Then you most likely have Dutch Lap and will need to contact me as none of these mounts offered fit dutchlap style siding.
*If you are unsure of the mount you need or the siding you have do not hesitate to contact me. sending a picture always helps and i can assist you with what item to order.
To Install: See my new installation video on youtube! (Video is for Ring but works for Eufy as well) https://www.youtube.com/watch?v=wQ1v_k3mTzY
Siding Options Explained:
4" Standard Vinyl Option (common) This is a common Vinyl siding. Comes 2 slats per panel. This is for Vinyl siding that has Panels that measure exactly 4 inches each. Standard Option means the panels are not exactly flat on the front they have a slight curve.
4.5" Standard Vinyl Option (common) This is very common Vinyl siding. Comes 2 slats per panel. This is for Vinyl siding that has Panels that measure exactly 4.5 inches. Standard Option means the panels are not exactly flat on the front they have a slight curve.
5" Standard Vinyl Option This is very not standard size Vinyl siding. Comes 2 slats per panel. This is for Vinyl siding that has Panels that measure 5 inches or larger. Standard Option means the panels are not exactly flat on the front they have a slight curve. 4" Board/Metal Option (common) This is for Hardi board, Cement board, Cedar, Aluminum or any flat but slanted front siding. Usually comes in single 1 slat per board. This item is for Panels that measure from 4" up to 5" tall.
5"-6"+ Board/ Metal Option [NEW ITEM] This is for Hardi board, Cement board, Cedar, Aluminum, Shake Vinyl or any flat or slanted front siding. If you panel is 5 inches or longer you may want this version. It does not have the standoff legs. This version allows you to place your doorbell anywhere on the panel. Perfect for if you want you doorbell higher, lower or centered on the panel. It still has the Siding angle built in so doorbell faces straight ahead. This is the version you want if you have flat siding (brick, stucco, etc) and want to angle your nest up or down 7% This is the version you want if you have angled siding such as vinyl siding but your doorbell is too low and you want it angled up more. this will angle the doorbell up addition 7 degrees on angled siding. (This item is not pictured)
For Dutchlap vinyl siding please contact me as every dutchlap siding panel is different. Printed in a material called PETG. This material resists UV LIGHT and resists all sorts of chemicals. Recyclable. And most importantly resists cold temperatures as well as up to 200 degrees Fahrenheit
. Now ships with printed installation instruction sheet. Comes with two longer screws. All mounting hardware you need is included.
RCA,Hikvision nor any doorbell pictured is not included.